Glitter Ornaments
December 20th, 2009 | 
Author: You have to watch this Youtube video that shows how to make glitter balls. I tried it today and LOVE it!
I used Mop & Glo instead of the Future as shown in the video. It worked perfect. I cut the names out in white vinyl on my cricut using Sure Cuts A lot.
Here are the pictures. I got the ornaments at Michaels on sale 50% off. I got these with a little bit of the pearl glaze on them and they still turned out very pretty.
Posted in 
Tags: 
Hi.
LOVE your ornaments!! Would you mind sharing what font you used on them? It’s really perfect.
Thanks!
Jenn
Hi,
Thank you for stopping by my blog. The font is HLF Goldsmith Script. I e-mailed it to you in case you did not have it.
Beautiful!!! I was going to ask about the font also. Could I please get it from you? It’s hard to find a chunky script.
My son and I had a ball making those! I tried to go back and get some more, but Micheal’s was sold out! I love the font!
love them, I have to keep them in mind for next year!! Awesome
I just saw this video on another site–these are fantastic! The white vinyl really makes a nice contrast.
Lovely!
Fabulous idea. I’d also love the font for the script. Merry christmas to you and yours.
I had to look all over for the floor polish, but finally found it! Mine came out fairly nice and I used Stampendous glitter, but I bet using Martha’s glitter may have made a difference (seems to be a bit sparse in some areas). I adore the font you’ve used, may I also have it emailed over to me? Thanks so much!
I LOVE your Christmas balls – I had no idea it would be so easy. Looks like I’m going to have to go to Michaels tomorrow for a last minute craft idea to do with the kids. I do have one question for you….I’m new to vinyl – I’ve bought about 20 rolls of it and have yet to try it out. I’m concered about how you were able to get the names on the balls without the vinyl bubbling or creasing up. What’s your secret? I love that font and will try to find it on line!
Hello. Beautiful ornaments. I think I like yours more than the original.! I have the origianl cricut. Can I cut vinyl? I know everyone asked, but can i get the font too It’s gorgeous,! Thanks
Beautiful ornaments! I will have to remember this for next year.
Love this so much been trying to find the font no luck could you send it to me also.
Thank you.
Tammy
tccherrychics@yahoo.com
I agree with everyone’s comment. The balls are so very pretty and I too love the font! The white vinyl lettering really adds so much!!
Question I have… how small can letters be cut with the vinyl? As small as handwriting might be? (for scrapbooking…)
Thanks!
In SCAL you can make the characters smaller but the smaller they get (handwriting size) the more delicate the cut. The delicate cuts you have to be very careful with since they are fragile and will tear. I have seen some but it takes a lot of patience. I have never had much luck with tiny cuts. I sized each name above to have about a 1 inch height not including the hanging Y or G Parts of the names.
I am a new cricuteer and your blog was the first I came upon, enjoying your creativity. Would be willing to share that font with me as well? Thanks, GinaS
I made a bunch of these glitter balls with my 10 yr old daughter! We had a blast working on them and they were very easy!! Thanks for sharing your pics! Karen
I love these. They are beautiful. I am so glad I finally found your video. Can’t wait to try them. Could you please share the font? I have purchased so many fonts trying to get one like this with no success thus far. Thanks in advance.
Hi,
Thanks for stopping by my blog. I sent the font to you, I hope you like it. It is a lovely font.
I viewed this video a few days before Christmas and had to immediately try it. WOW! It was so easy and quick. My husband was even impressed. Thanks for posting.
I would love the font if you could email it to me. I can’t wait to do these ornaments for my family. I make ornaments for everyone every Christmas and I am running out of ideas for them. Thanks!
Jen
Hi I’m a little late in the game but just found your blog and was reading through the post and I like everyone would love to have the font. I’m looking for a good font to do some wall art for my studio.
Thank you.
Karen
Also, love the font. Please share. Tried to download from the internet and says no longer available. Christmas balls are beautiful!!!
These are so cute. I have shared this idea with my S-I-L who is a school teacher and always looking for new and simple ideas for her students.
I am also interested in the font if you are still sharing…
thanks
Cindy
I love these! I am thinking I’ll make them for gifts for all the neighbor kids for christmas. I too am wondering if you could email me the font. Thanks!
Your tutorials are wonderful…very helpful. The Christmas balls are darling. May I also request your font. It’s perfect! Thank you for sharing your talents with us.
Just stumbled upon this tutorial. What a fun project. I too would love the font if possible.
BLessings,
Marilyn
This is a great site. It’s nice to know that the Mop n Glow works too and looks the same. You did such a great job with the names I can’t wait to try it this year have made the paint swirls but never the glitter. I would love to have your font also if you are still sharing . Thanks so much, Debbie
I love love love these balls. I make a handmade gift for my best friend and her 2 daughters each Christmas. I will be doing these this year.I know you are probably tired of sending this font but I would really love to have it.Thanks for letting us in on this.
Would you email me that font for the Christmas balls?? I love how it looks and can’t find one like it on the internet. Thank you!
I am ready to try the Christmas ornaments. I am going to make them for my family. I am also having trouble finding the font. Could you please tell me where you got it. Thank you so much for posting this video!
These ornaments are beautiful. I am so glad I finally found your video.
I too am wondering if you could email me the font. Thank you.
Would you send me the font as well, please?
Great idea and just in time for starting my Christmas gifts. If you dont mind please send the font to me as well. Thank You very much.
THANK YOU so much for showing how to make the Christmas balls. Very excited to make them! I’m having a hard time finding the font online as well. If you’re still sharing ~ would you be willing to email it to me also? Thanks!
Please send me your fonts. I love looking at you work.
I love your glitter balls! They are beautiful. Would you please email me the Goldsmith font? It goes great on the ornaments.
I came across you website and this post jumped out at me! These are beatiful and so easy. I’ve already made a few.
I hope you still get this comment even though it’s almost a year later for this post! Can you email me the font you used. I tied one I already had but it was to thin in some spots and other fonts just dont look as pretty. Thank you!
What a Great Idea!!! If your still sharing the font i would love to have it!! Thank you very much..
Ran into your website. What a wonderful idea. I know it has been a while since you did thid but can you please share the font. I am going to make some for Christmas gifts.
Thank you
Absolutely Adorable and so easy to do!! Thanks so much for sharing. Could I also get the font? Thank you!!
Would this work with the plastic balls? It would be great for the student Christmas ornament, but we have to have something that won’t break or it will never make it home.
hi, sorry, I am not sure about plastic, you could try and see how it works.
Thank you so much for sharing this technique. I can’t wait to try this. I have etched names on these glass balls, filled them with a little sand so they will stand upright and then placed them on our Christmas Dinner table instead of name tags. If you still have this font available, would you please send it to me. Thanks for sharing all of your creativity.
Thank you so much for sharing such a great idea. Would I also be able to get the font that you used? I have SCAL and would love to make some of these for the holidays.
Thanks, Andrea
JUST LOVED THIS!!! I’m learning to cut vinyl and stumbled across this VERY CLEVER idea. I hate to ask, too – but can you share your font with me? I would love to try this project for my grandkids! I love all your ideas! Thanks for helping all of us be more creative!
I am going to make these for goodie bag gifts for our retreat! I would love to get this font if you’re still sharing it!
Thanks for your instructions & pictures – I can’t wait to get started!
I didn’t realize that you also did the Glitter Ornaments youtube video also! Saw it last year and didn’t ever try it but have all the stuff to do it this year. Got some plastic clear Ornaments at Michaels and going to see if they do OK with this Technique. HOPE SO!! Then if they fall off the tree they won’t break. Will let you know how they turn out. THANKS for sharing. You are so talented!! Sarah
Would also love the Goldsmith script if you can send it. Would love the font. Just found your site and love it!
I can’t wait to do this with my scouts! They are going to love it for this holiday!
Oh my Gosh! How gorgeous are these! I will be making them with my Grade 6 class!
Thanks so much for your generosity in sharing your pictures and instructions.
I also LOVE the font, are you still sharing? I (& my grade 6s) would be very grateful if you could email the font to me.
Thanks again,
Kim
Awesome Idea… Have been trying to figure out a color technique with etching an ornament – Love this route even better! Can someone email me that font as well please? (HLF Goldsmith Script) shellyadams@windstream.net
Thanks!
Shelly
Love these ornaments. I tried it with the plastic clear ornaments and it seems to work fine. I would love to have the font if you are still sharing. Thanks
Can you email me the font as well. I cannot locate it anywhere and I just love it.
I guess I am a Johnny come lately but just stumbled across the ornaments and they are gorgeous! I would love to do these for my children and their friends with their school colors and names!Please send me the font if possible. Thanks
I found your page while looking for directions on making word books. I have found so many things on your site to keep me busy doing for the entire Christmas season.
I am interested in the beautiful font you are sharing. Please and Thank you very much.
I may have a stupid question but I will ask it anyway. Since this is done with a floor finish is it going to last from year to year, or will the glitter eventually start coming off or discolor??
I love the ornaments. They are beautiful. I am going to try to make some next week. If you don’t mind, would you please share the font with me also.
Thank you so much.
Pat
I checked mine a few weeks ago when someone else asked and they are fine, I have not had any trouble with them coming apart.
Hi
I came across your site and saw the beautiful glitter christmas glass balls you made but can’t find a good font like you have on yours I was wondering if you are still sharing yours Thank you
Doreen
I really enjoyed the video and would like to have the font. I have bought everything to make these, but would love to have the font. Could you please email it to me. Thank You!!
I made the glitter balls today. Made the mistake of using regular crafting glitter. Martha Stewart glitter is so expensive at all the major craft stores to make several balls …. anyone have a good wholesale resource to share for craft supplies? Thanks!
Sorry I don’t. I buy the Martha Stewart Glitter with a 40% or 50% off coupon from Michaels. You can use the coupons on Martha Stewart as long as it is not on sale that week.
While I was searching for an SVG file to use on my Cricuit I came across you website. I am so glad that I did. I had seen the Glitter ornaments but had not been able to find clear directions until I saw your video. Thank you so much. Can you email the font to me or tell me where I can find it? Again, Thank you!!
I am so excited that I came across this. I can’t wait to try it. Like everyone else, I was wondering if it would be possible to get the font? I just love it. Thanks.
I have tried the glitter balls and love them. My church youth group wants to try and decorate a tree with everyones name. I have tried to find this font but have had no luck. Are you still Sharing? Thanks
Hi…you were gracious enough to email me the font that we’re all so crazy about but after I received it…I wasn’t able to save it or access it. Obviously I did something wrong. If you wouldn’t mind could you send it one more time. I promise I’ll be more careful.
Do I need the program Sure Cuts A Lot in order to use it? I’m a beginner…can ya tell?
Thanks for all your guidance.
Lark Muir
Has anyone came across the glass ornaments having a spectrum effect around the center of the balls? Not sure what to do about that. I went to Hobby Lobby and they all seem to have that same look on all the ornaments. Also, has anyone considered or done any embellishments to add an extra touch?
Hi! Just ran across your site! It’s awesome! I love those ornaments and would love to make some for Christmas gifts. Could you send me that font too? I hope I can do this as well as you. I am a very new Cricut user but I can’t wait dive right in. Thanks so much for sharing your tutorial.
~Allison
I have used the pearl toned ones with no trouble.
I also love the balls. I tried making these with glue – bad idea. Love the wax. Also the font you used. Can you send it to me?
Loved this ornament!!! Thanks for share. Can u sent the font my way as well?
Thanks for sharing these are just lovely…I will be making for Christmas gifts for my co workers this year. Will you please send me the FONT I can’t seem to find it online.
Great work!
These are great! I would also love the font if you could email it to me I would appreciate it!
Hi, I just found your website the other day and have spent all weekend looking though it. You are very talented. I just found the video for the glitter balls this morning and I am so excited to do these myself. I am sure you are tired of people asking you to share the font but it really is lovely and I would really like to have it. Are you still sharing? Would you mind sharing it with me…pretty please. Have a lovely day. Kelly
I am another in a long list of admirers. Can a link be posted for the HLF font?
I have had no luck in finding it elsewhere.
thank you for the great project idea.
Just tried my first ornament and it worked great! So easy. Is the font still available? Like everyone else I would love to have it. Thank you, Kathye
I love these ornaments! I need that font!!
THese are great. I am going to give it a try after I get some future! I’d lov the font as well can’t seem to find it.
I’m with everyone else…would love the font too! What a great project to make! Thanks so much!
Hi
I too came across your site and saw the beautiful glitter christmas glass balls you made but can’t find a good font like you have on yours I was wondering if you are still sharing yours? Thank you!
has anyone found this font free?? can someone email me?
Wow, love this idea! I too would love the font. I am brand new to cricut, this seems like such a fun project
BEAUTIFUL ORNAMENTS !!! My cricut Expression should be here today !! I MUST make these with my kids ! Please send me the font file, I am unable to find it on the internet :O(
Love the glitter ornaments. Would you please send me the font? Plan on making them for Christmas this year.
I used a font called Billabong. You can find it free on the internet and it really is a pretty, readable font.
I would love the font too. Thank you for sharing.
I LOVE your blog. These ornaments would be a fun project to do today: I have a Michael’s coupon and they’re taking another 15 percent off everything. I would so appreciate it if you would send me the lovely Goldsmith font.
Thanks so much in advance
Laura
Beth,
I love your blog – this is really fun that this blog started last year for Christmas and is still being looked at this year!
I would love to have the font as well. We are having a holiday craft show as a fund raiser for Haiti and I was looking for ideas. I’m thinking this will be a great one! Rather than names, I will put Christmas words – or maybe take orders for names.
Thank you for sharing your beautiful talents!
Phyllis
Hi, I was just wondering if you were sharing your font file. I cannot find it and would like to have it. Please let me know. Thanks for sharing your talent.
I love the glitter balls. They are so beautiful. Would you please email me the font you used on them?
Hi – I know I’m about the gazzilionth request for the font, but I would love to have it. Your ornaments are beautiful and I think this would be great presents for all the nieces and nephews this Christmas! Thanks so much for sharing your work!
Anne
I love the Christmas balls – I used the flatter ones and love the shape. I’ve tried 2 different fonts but really like yours better. Could you send it to me? I have only used downloaded shapes so I hope the fonts are just as easy! Thanks for ALL of your ideas – they are awesome!
Hello from France!
Your christmas balls are very beautiful and I want to make the sames.
Could you send me the font please?
Thank you very much
Hi!Thank you so much for sharing such a great idea. Would I also be able to get the font that you used? I would love to make these for my family and friends! Hopefully they will turn out as great as yours!!
Thanks in advance!
Maddie
Hi, Love the ornaments and was wondering if you could please share the font with me also. Thanks!
Love these! I want to make them for my daughters cheerleading squard for Christmas! Could you email me the font?
LOVE these ornaments!! I’m about to jump in my car to get glitter! I would also love the font if you don’t mind sharing again!:-)
Thank you so much for the wonderful help in working
with this project. I have never tried using the vinyl
with my Cricut and want to try this craft. I hope to
do these with my daughter. I would love to have the
font you used if you would share it with me.
Many thanks.
Nancy
Just found your website. love the glitter balls I have 9 children in my in home daycare and always looking for christmas gifts for Moms. I would love the font also if you could email please????
Could I also have a copy of the font. I love the ornaments and would like to make them also. Thanks.
With so many loving the font you used would you mind posting a link to where you got it from? I have looked but have not found anything close. Thanks for sharing your great idea..
Hi, Like everyone else said, these are wonderful. Would you mind giving me the font, to, HLF Goldsmith Script. Also, what settings did you use on the cricut? Did you need the deep cutting blade or regular blade for the vinyl?
Thanks for answering all my questions.
Linda
I would share a link if I could, I don’t have one to share.
I love that font too! So want to try to make these! Would you mind emailing it to me as well?
I found this post last January. I have been waiting all year for this project. Will you please send me the font. Thank you
I would love the font too!! I’m getting ready to start my ornaments this year.
Thanks for sharing!!!
Can you please email me the HLF goldsmith font. I have searched everywhere for it. Thank you for sharing the glitter balls and instructions. I can’t wait to try them. Thanks again,
Debbie Thomas
Wow! I’ve made these a long time ago with stampin up glitter and the bottles of reinkers. THIS IS MUCH EASIER! Thanks for sharing.
I would also like for you to send me a copy of the HLF Goldsmith Script font. I came upon your site by accident and I’m so glad I did. What a great idea….
Could I get the font that was used on the Glitter Ornaments? Thanks
Can you please send me the font you used for the glitter balls. I have searched every where for it with no luck.
Thank you very much, Debbie
These are so beautiful! I would love the font as well. I think I have found my Christmas gifts for this year. I love doing crafts with the kids in my family and this would be perfect. Your site is wonderful and thank you for sharing!!!
Hi! Just found your site and was thrilled with this project. Would you mind sharing the font with me too? Seems like a great, affordable project to do with my students for Christmas. Thanks!
These ornaments are so fantastic, what a great project for my daughter and I. I have been on line looking for the font you used and can’t seem to find it. Could you direct me to it please. Thank you for sharing your beautiful project!
Just stumbled onto your website and absolutely love it. I’m always looking for new ornaments to make and love these. Can’t wait to do them. I also love finding and downloading new fonts. Love this one. Could you please email it to me as well. Thanks for the inspiration!!
These are so pretty. I would love to put some on my tree.Can you please send me the font you used for the glitter balls?
Hi love these balls and keen to make them however I am in Australia and unable to find the floor cleaner chemical needed has anyone heard of another floor cleaner I could use as an alternative Thanks
These are beautiful! Would you please also send me the font? It is beautiful and I can’t find it anywhere else to download. Thanks for the idea for fabulous gifts!
Wow–these ornaments are great. Always looking for crafts to do with my Girl Scouts and this is sure to be a big hit. Would also love the font if you are still sharing
J
I am so glad I found your blog! Awesome Glitter Balls. Thanks for sharing. I tried to download font from the Internet, but couldn’t find it??? If your still sharing, I would love the file, please. Thanks so much!
Jennifer
HI,
I would like to make these, can you please tell me what/where or how to get the font?
Thanks
Your ornaments are beautiful!!!!!! I just love that font if you are still sharing I would love to have it. You are a very talented lady and I hope one day I can be half as good as you!!! I had my cricut for maybe a year still learning on a daily basis. Thnaks for sharing and all of your hard work!!!!!
I would like to receive the font as well. Thank you for your time in sending all these requests out.
I have been wanting to do these ornaments for a while!!!! They look great! Could you please send me that font, I love it!!!!
Love it. I do a before school and after school program and I this will be a great project for the kids. Can I to have you email me the font. Just how dose that work.
I have only used my cartridge with my machine. Thanks so much for sharing.
This is the best video I have seen for making these ornaments. When we were poor struggling college students we went to the thrift store and found colored ornaments that we put a little bleach inside and swirled it around and we had clear ornaments. Takes a little time but it saves money. I would also love this font if you aren’t tired of emailing it.
I am going to try these also later today but could not find the font. If you still have it could you email it to me also? Thanks for sharing.
I would also dearly love this font. What a perfect gift to make and give! Thanks so much for sharing this!!
Thank you for sharing this project! I am going to start on these tomorrow. I almost feel guilty asking…but could I get the font also? I looked everywhere on the internet and it’s not available.
I look forward to seeing more of your work!
Your ornaments came out absolutely beautiful. Thanks for also linking the video to your blog. Would you be willing to share the font with me also?
These are adorable and SUPER easy to make. I was looking around for ideas for the glass balls and found your site. I can’t wait to try it! They are SO pretty
Can you kindly send me the font?
Thank you SO much
These ornaments are so pretty. I am going to do some for Christmas. I would love to have the fonts you used. Thanks so much for sharing this project.
Would someone please share this font with me. My email is married2arocker@yahoo.com …. Thanks ! I have the ornaments done but can’t find the font !
Wow, they’re gorgeous. Will be making them for my 9 grandchildren. Could you please send me the font also?
I so appreciate you sharing this tutorial. I bought an entire bottle of that floor polish last year for polishing altered dominoes, and have used about 1 tsp of it, ha! (dominoes are tiny) Now I have a use for more of the bottle! I would very much appreciate getting a copy of the font for this lovely project! (you knew I was going to ask didnt you, wink)
Also LOVE the ornaments. Could I be the bazillionth person to ask for the font? So many trees are prettier because of you!
I love these and I’m ready to make them. Can you send me the font that you used- it is perfect, others are just not right. Also, how did you get the vinyl to go on the round surface without bubbling? Thanks
[...] The glitter ball ornaments that I made last year have been a very popular post. The question I have been asked second to the font is, how have they held up through out the year. I have been going through decorations today and I thought that I would post a picture. Here they are!! [...]
Hi,
I would love this font too if someone could email it to me at yoonmegopark@hotmail.com
Thanks!
I was looking for a new idea for my next turn at hosting a craft night with my sisters and LOVE the glitter balls. How do people come up with the ideas of using ordinary household items like Future to add to their creativity? Brilliant! I like everyone else would love if you could email me the font.
Also, I saw an earlier post that asked how you prevent bubbling when applying vinyl to a round surface. I seem to have that difficulty and would love any helpful tip!
Thank you for sharing your creativity!
Pam
I loved the ornaments and know that this will be a great craft with my daycare kids. Could you please send me the link to the font also? Thanks for the great idea.
Hi. Thanks so much for sharing. I’ll be doing this project with my 3rd graders ! Please send the font to my email. Thank you again and Happy Holidays!
No wonder you are number 1! I love your work and would totally appreciate the kindness of a download of the font or font site. Thank you so much
I love these ornaments. I would love to make some for the grandkids. I know you are bombarded with requests, but if you’ve got time I’d like the font. It seems just the right script to show on the glittered ornaments.
I would love to have that font to make my balls. Thanks for the idea.
Can you please email the font, as well. I am a school teacher and would LOVE to make these for my students. Thanks so much for posting these fabulous ornaments and handy video tutorial.
I would love the font for this project please. Thank you
Beautiful ornaments! I have just discovered using vinyl with my cricut. I am going to make these. If it is still possible to get the font it would be greatly appreciated. Thanks for sharing!
I love your glitter balls. I teach 9th grade and would love to try it with them. If you are still sharing the HLF Goldsmith Script font, I would love to have it. The gliiter balls are gorgeous! Thank-you for your video.
I really think these are so wonderful!!! Is there any way i could get the font you used.Thanks For sharing you wonderful ideas.
Thanks Lisa
I know you’re swamped with requests for this font so I tried to look for it online and no luck, if its no bother can you share it me as well? Thanks
Love these, I too would like the font emailed. Also do like SCAL? Have you used MTC? If so which one do you like best? Thanks for any help and Happy Holidays.
Well .. . . I am just like all the other girls . . could you email me the font too? Thanks
Love, Love, Love the ornaments. Could you please email me the font too??
Thanks so much for your generosity with your time and efforts. I would also appreciate a copy of the font you used.
Mia
Absolutely gorgeous ornaments. I am new to SVGs and Cricut and vinyl but am enjoying it as I learn. I tried finding the font but was not successful. Would you mind sending the font to me? Thanks for sharing your talent with the public.
I have both SCAL and MTC. I love both of them.
I have looked everywhere for your font and I can’t find it anywhere. I would love to use it to make this GORGEOUS balls!!! if you are still sharing I would love you to email it.
thatssewfabulous@gmail.com
I just came across your site and I love it! Lots of great ideas for Christmas gifts. I better start cutting!
[...] finished working on the glitter ball Christmas ornaments for my work so I thought that I would post a picture. Everyone loved the way that they turned [...]
I have made several of these ornaments since finding your site about 6 weeks ago. Among the glass ones, I experimented with the plastic balls sold at Micheal’s. The results where amazing. Which is great, considering I made a dozen for my 2 yo son’s daycare class. I have not gotten to the name placement part, because I am unable to find the font. May I also get it emailed to me, please? Thanks for sharing your talent!
Hi! I was searching all over for a font I liked and then I found this one on your blog…I can’t seem to find a free download for it…could you please send it to me as well? Also, did you weld the letters together or one at a time? Have you tried a different color vinyl? I like the white but I’m nervous to try red or green on a white glitter ball, your thoughts?
Thanks!
Can you please send me the font. I have searched everywhere for it and it isn’t to be found. Thanks so much.
Hi,
Yet another person that has stumbled upon your great blog! I’m relatively new to the Cricut and SCAL (haven’t used it too much since I got it), but I’m raring to go to try these out!
If it’s not too much trouble, I would greatly appreciate the font file as well: orca0024 at yahoo dot com.
Thank you so much!! I can’t wait to get started on these!
Can you please email me the font as well. Love it. I just discovered these, and they are perfect for a group of girls.
Hi! Just found your site and was thrilled with this project. Would you mind sharing the font with me too? Seems like a great, affordable project to do with my Great Grandchildren for Christmas. Thanks!
I love love love this project. Thank you so much for sharing! I would also love to have your font if you could please email it to me. Great Job!
I love your glitter balls. Could I please have the font emailed to me. THANX for posting.
These are the best I’ve seen yet and I L-O-V-E the slight pearl sheen! I have hunted and hunted for that font as I would like to use it too, but haven’t been able to find it. If you would be so kind as to share it once again, I would appreciate it. If not, I completely understand! I’ve been a follower for a while now and want you to know how much I love your stuff! I check once a day to see if you’ve posted anything new. I guess you could call me a blog stalker! LOL! Anyways, thanks for sharing your project pics with us they turned out fabby! Have a great day!
These are awesome. Could I please get the font. I am unable to located it anywhere!!!
I too have been searching for the font you used. I made glittered ornaments the other night and had a heck of a time finding a pretty script that was thick enough to turn out nice even with bold. I was using the smaller ornaments.
Your bows are wonderful too!
thanks for sharing!
I know you are tired of emailing that font! But I have tried so many and none look as good as that one! Could you share it with me too?
I found your site last night and just got back from getting supplies! Can’t wait to try them they look beautiful! Would you mind sending me the font too? Thank you so much for sharing your idea!!!!
I am glad to hear that the glitter balls have held up for a year so far. I got some of the plastic ornaments at Michaels on sale. I would also like to get the font if you would e-mail it to me. I assume it can be used on a Mac?
Thanks, Carol
I just got my Cricut on Black Friday. I didn’t even know I wanted one, but now I’m addicted to it and your blog. The ornaments are gorgeous. I can’t wait to try this. Are you still sharing the font? I have other fonts, but love this script font because it’s so perfect for the Cricut and this project. Thanks for sharing.
I always wondered how they did that! Just gorgeous!! By the way the font is LHF(Letterhead Font) Blacksmith Script and it isn’t free. Thanks
These ornaments are beautiful!!!!!
I would like the font, if you could please send it to me! I would be forever grateful!!!
Thank you for sharing your many talents with us. You blog is a great source of inspiration for me!
Colleen
I feel like a broken record… I’d love the font, as well, if you are still sending it out.
Love these ornaments. Off to buy some ornaments before they all disappear. Now all I have to do is find the font. If you’re still sharing the link, I’d love it. Think I’ll start with the ornaments and hopefully find a font that is a pretty as the one you used
thanks and happy holidays
WOW! Those are amazing, and SO simple!! Could I please get the font?? I love it!
I just came upon your blog-love, love, love it. You have done a fantastic job with the glitter balls. I was also wondering if you would send along to me the font file for the balls. It is just perfect and I cannot locate on the web. Have a Merry Christmas.
Would also love to have this font. I have made several of these ornaments and this font just makes them more beautiful. Thanks so much.
These are very gorgeous! You are very clever. Could you please share your font with me? I just stumbled on this site and love it.
GORGEOUS!!! Thank you for sharing with us! I’m new at the Cricut and am so glad to have found your site! Going to Michaels on Sunday, since my tree is lacking ‘special’ type ornaments! Love this idea, thanks again for sharing! And I too, if anyone is able to share the font, would appreciate it! Thank you!
Kim
I found your glitter balls video on UTube and made them as gifts for the people at my office. Thank you so much for the idea. If you would email the font to me as well, I would greatly appreciate it.
Dawn
I just came across your project and would like to try this great idea! Would you be kind enough to send me the font, too. I’m a teacher and these would be perfect for the students. Keep creating for those of us who need ideas and inspiration. Thanks so much and Merry Christmas.
LOVE THESE! Could someone send me the font if you still have it? cmh05g@gmail.com
I’m new to your site and love the glitter balls! I can’t find the font you used without paying a fortune. Was there someplace you found it you wouldn’t mind sharing? thanks
I too would love this font if someone could email it to me.
i_am_angie70@yahoo.com
Thank you!
OMG, Poor Beth! I just read each and every comment on the glitter balls looking for a solution to my script laying down across the curved ball.
I have spent two days experimenting with various adhesive solutions to no avail. I’m cutting paper (not vinyl) and using plastic ornaments (not glass). I think that’s the trick. I’m going to get some glass balls tonight to see if that works. I’m exasperated with this! I downloaded a free Disney font, cut my friend’s name out on lightweight card stock and cannot, to save my life, make all points of her name stay down on the ball! If I can get this to work, I’ll glue two black pom-poms as mouse ears and give it to her for her birthday this Friday! Yikes!
Happy Holidays Beth!
Thank you so much for sharing this project…I would LOVE the font too!!
I am a 2nd grade teacher and I LOVE these glitter ornaments! I love this font. however, my 2nd graders don’t read their name very well in cursive…is there another chunky font like this that you could send me that will still apply really well on the glass ornaments. Also, I have never used vinyl with the cricut. Any suggestions or do you cut the same way you do with card stock? Thanks a bunch!
Hi! Just ran across your site! It’s awesome! Thanks so much for sharing your tutorial.I love this font is it to much to ask for you to email it to me? Thanks Rose
OH HOW BEAUTIFUL these are!!! If I have some time I would LOVE to make some for my Mom for Christmas!!! Can you please email me the font too..it’s really pretty and perfect for the balls! Thank you! Love your blog!
Valerie
valerie1011@q.com
Hello, I love this project. Will be making them for our tree and as give-a ways. Would you please also email me the font. I could not find it anywhere else. Thank you.
sorry, I have only tried this ornament. If you search my blog for Kiss Cut you will get information on how to cut vinyl. It is a whole lot easier then it looks.
I don’t think that plastic balls are the problem. I think that it is the paper. It really is not meant to curve. The only solution I could think of would be to wet a paper towel. Lay the cut paper on it and press it gently with another piece of paper towel to gently moisten it. Then put it on the ornament where you want. Let it dry, when it dries take it off and it should be the same shape as the ball. Gently put your adhesive on it and reposition it back. I have never tried it so it is just a suggestion sorry.
Love the glitter ball ornaments. Would like the font or like to know where to get it. The lettering is perfect for this. Thanks for sharing with us!
Just came cross this site this week. LOVE it. I made one of the of these Christmas balls, super easy and looks great. thanks for sharing. My I get the font also? I’ve been looking for one like this, it’s perfect.
LOVE these ornaments!! We just made these as a holiday craft for a Christmas party and the kids loved making them!! I have SCAL, but couldn’t find the font, so used Loop de Loo instead. They came out really cute, but would love your font if it’s possible. Thanks for the super great idea and tutorial! Will be making as family gifts as well.
Very Pretty, easy project. I’ve had some glass balls and glitter in my craft closet for a while and now I have a great new gift idea! Thanks!
just found this site and love it!! I would really appreciate it if you would send me the font for these Christmas balls. You are very talented. K
hello….i was wondering if you could pls email me the font you used for this project….thank you and have a merry christmas
HI there, these are so beautiful and definitely going on my tree this year! Can you please send me the font that you used and is it perfect!
I LOVE THESE ORNAMENTS!!!! I told a friend about it and she is making them with all of her daughters friends for her 8th birthday party. I volunteered to do the vinyl and would LOVE it, if you could PLEASE send me the font. My email is cheertwinsmom@bellsouth.net Thank you so much!!!
please email me the font..I would love to use it as well…
Graet job…loved making these…if you are still sharing the font..would love it. Had a hard time finding a good font to use. Thanks for a great tutorial!
Can someone please send me this font? I can’t find it anywhere…mistinevins@yahoo.com
I love this idea and could you plese send me this font. Thanks
I love your blog . It is wonderful . The ornaments are gorgeous. I am retired from a stenciling , faux finish business, we often worked with vinyl stencils on curved surfaces, albeit not so small. One trick is to seal your edges with an old credit card. Sorry this may be too late. What Can MTC do that Sure cuts alot cannot?
Would you send me the font used on the beautiful glitter balls? Thank you in advance.
Hi, I love love love your website! I tried to make ornaments like these BEFORE I found your site and they turned out ok, but i didn’t use the floor cleaner…i will now try them with that! mine took forever to dry (again, without the floor cleaner). Thanks for posting them, yours are beautiful! Could I also get the font please? Thanks again
Hi these are wonderful. I just made some for my friends for Christmas (we do Christmas with them in January) I was wondering I could get the font? I have searched but can’t seem to find it (as I read the posts I am not the only one
) I also posted this in your newer Christmas ball post too. THANKS SO MUCH and again beautiful job!!!
I’m too late for this year, but love these glitter balls for next year. Would you please send me the font you used. Thank you. Happy New Year
love the glitter balls! would like to make them, would you mind sharing the HLF Goldsmith Script font?
Really neat idea! I just want to say to remember to use a little Elmer’s glue and glue the metal top on so it won’t come apart and then fall off and break. I love anything with sparkles, and if I had my choice, I would love to glitter most everything!!!
I have searched for the font you used but can’t seem to locate it. Could
you send it to me? It was perfect for the beautiful balls! I want to get
a head start on next years gifts !!!!
Two years later and probably the jillionth person to ask…could I have the font e-mailed to me too? It’s awesome!
I made these ornaments & used the font Rose Bound Black (free) very similer to Goldsmith & looked great.
I wish I would have found this before Christmas! Definately doing them next year. Could you please send me the font too?!? Thank You!
These balls are beautiful! I wish I had come across these alot sooner. I know you are probably tired of this…..but could you please send me this font! I have searched the internet for 2 days and I can’t find it. Thanks so much for your time.
Hi, I saw the video of your glitter balls.
Can you send me a text of instructions since I am deaf and cant hear the person talking. And can you please supply me with the font.
It looks so beautiful!
Your ornaments are gorgeous. Can you please send me the font. Thanks!!
These are absolutely beautiful!!!!!!!!!!! Amazing work! I too would love the font if you still have access to it. I have tried to find as well with no luck and love the combination together with the ornaments.
I love what you did with craft ornaments and would love to re-create the look for next Christmas. Would you please send me the font and explain how to use it with the Cricut cutter? Thanks for sharing and sending me the font!
I’m way late on this, but I want to make them anyway! I think I’ll do it for Valentines Day! If you would be so kind as to email me the font as well, I’d greatly appreciate it!!! Thanks for passing along the awesome idea!
Hi, I too am in awe of this wonderful project and would love the font mailed to me when you have a minute please.
Many thanks in anticipation.
I just saw your glitter ball ornaments as well… LOVE THEM!!! What a beautiful job you did. I, like so many, have not been able to find that great font. Would you mind sharing it? Thanks!
I loved your ornaments! I will definitely be making some for next year. Would you please share the font and where I can find it also. Thanks.
Love Your videos especially the ornaments. May I please have the fonts too?
Please, would you send me the font that you used on your glitter balls? Also any tips you have for applying the vinyl straight to a round ball? I would greatly appreciate it.
Elaine
Would you send me the font used on the beautiful glitter balls? Thank you in advance.
I just love your christmas ornaments!
Wow! Looks so easy. Where in the can you find Mop N Glo or Future??? May I also get the font from you?
Is there a chance I could get this font from you – I made some of the ornaments this past year and used Ballpark font, but this one looks better. I also made some with pictures on them for my nieces and nephews (actually they made them – I assisted).
Just came across your ornaments and LOVE them! I hate to be a “me too”…but if you’re still willing would you email me the font? I too have not had any success finding it. TIA
Please please share the font, I want to try these so bad……..Karen, I also can’t find the Rose Bound Black font!
Hi – I’m super late now that it’s 2011 and just seeing this video tutorial. I know I’m about the balzillionth request for the font, but I would love to have it. Your ornaments are beautiful and I think this would be great presents for all the family this Christmas and I like to get a head start! Thanks so much for sharing your beautiful work!